BOSCH GDS 18V-1000 is a full power, no cord: 1/2″ high torque impact wrench with BITURBO Brushless technology
- High power with cordless freedom thanks to ProCORE18V batteries and brushless motor
- Best performance for heavy duties with a tightening torque of 1,000 Nm and a breakaway torque of up to 1,600 Nm
- High versatility and controlled power due to 3-speed/torque settings
Product Highlights
The GNH 18V-64 M Professional with single and contact firing modes is the mobile solution for quick and precise fastening of different materials. The cordless nailer is operated without any compressor, air hose or expensive gas cartridge – just insert the battery and you are ready for work. When the nail magazine is empty, the workpiece is protected from damage by dry-fire lockout. The GNH 18V-64 M is equipped with an intuitive User Interface (HMI) for easy activation of firing modes.
Equipment & Application
It is the ideal choice for trim work on base boards, window and door casings, chair rails, and staircases and mouldings made of softwood (i.e., pine), hardwood (i.e., oak, maple, birch) and composite trim materials. It is compatible with all Bosch Professional 18 V batteries and chargers (Professional 18V System). Also compatible with AMPShare, the multi-brand battery alliance.
Additional Information
The GNH 18V-64 M Professional offers both single and contact activation (bump fire) firing modes using finish nails with a diameter of 1.6 mm and a length up to 64 mm. It is well balanced and its new design allows a user to conveniently lay it down when work is interrupted. The cordless nailer also enables highest precision through accurate adjustment of countersink depth.
Technical Specifications
|
Torque adjustment range, min./max., 1st level |
0/350 Nm |
|
Torque adjustment range, min./max., 2nd level |
0/700 Nm |
|
Torque adjustment range, min./max., 3rd level |
0/1000 Nm |
|
No-load speed |
0 – 1,750 rpm |
|
No-load speed (1st level) |
0 – 800 rpm |
|
No-load speed (2nd level) |
0 – 1,200 rpm |
|
No-load speed (3rd level) |
0-1,750 rpm |
|
Torque settings |
3 |
|
Weight excl. battery |
2.9 kg |
|
Torque, max. |
1,000 Nm |
|
Impact rate |
0-2,600 bpm |
|
Impact rate (1st level) |
0-1,600 bpm |
|
Impact rate (2nd level) |
0-2,400 bpm |
|
Impact rate (3rd level) |
0-2,600 bpm |
|
Battery voltage |
18.0 V |
|
Tool holder |
1/2” Square |
|
Breakaway torque, max. |
1,600 Nm |
|
Packaging dimensions (width x length x height) |
268 x 292 x 102 mm |
|
Vibration emission value ah (Screwdriving) |
13.5 m/s² |
|
Uncertainty K (Screwdriving) |
1.5 m/s² |
