BOSCH GDS 18V-450 PC is a facilitates work with adjustable modes for consistent driving
- Two default screw modes for consistent driving. Each mode can be adjusted and individualised via the Bosch Toolbox App
- Powerful 450 Nm tightening and 800 Nm breakaway torque performance
- Versatile three-speed/torque settings for more flexibility and control
Product Highlights
The GNH 18V-64 M Professional with single and contact firing modes is the mobile solution for quick and precise fastening of different materials. The cordless nailer is operated without any compressor, air hose or expensive gas cartridge – just insert the battery and you are ready for work. When the nail magazine is empty, the workpiece is protected from damage by dry-fire lockout. The GNH 18V-64 M is equipped with an intuitive User Interface (HMI) for easy activation of firing modes.
Equipment & Application
It is the ideal choice for trim work on base boards, window and door casings, chair rails, and staircases and mouldings made of softwood (i.e., pine), hardwood (i.e., oak, maple, birch) and composite trim materials. It is compatible with all Bosch Professional 18 V batteries and chargers (Professional 18V System). Also compatible with AMPShare, the multi-brand battery alliance.
Additional Information
The GNH 18V-64 M Professional offers both single and contact activation (bump fire) firing modes using finish nails with a diameter of 1.6 mm and a length up to 64 mm. It is well balanced and its new design allows a user to conveniently lay it down when work is interrupted. The cordless nailer also enables highest precision through accurate adjustment of countersink depth.
Technical Specifications
|
Torque adjustment range, min./max., 1st level |
0/250 Nm |
|
Torque adjustment range, min./max., 2nd lev |
0/330 Nm |
|
Torque adjustment range, min./max., 3rd level |
0/450 Nm |
|
No-load speed |
0 – 1,000 rpm |
|
No-load speed (1st level) |
0 – 1,000 rpm |
|
No-load speed (2nd level) |
0 – 1,500 rpm |
|
No-load speed (3rd level) |
0 – 2,300 rpm |
|
Torque settings |
3 |
|
Weight excl. battery |
1.6 kg |
|
Torque, max. |
450 Nm |
|
Impact rate |
0-3,300 bpm |
|
Impact rate (1st level) |
0-1,900 bpm |
|
Impact rate (2nd level) |
0-2,500 bpm |
|
Impact rate (3rd level) |
0-3,300 bpm |
|
Battery voltage |
18.0 V |
|
Tool holder |
1/2” Square |
|
Breakaway torque, max. |
800 Nm |
|
Packaging dimensions (width x length x height) |
224 x 234 x 94 mm |
|
Weight incl. battery |
1.6 kg |
|
Vibration emission value ah (Tightening screws and nuts of maximum permitted size) |
14.5 m/s² |
|
Uncertainty K (Tightening screws and nuts of maximum permitted size) |
1.5 m/s² |
