About MAKITA HP001G Cordless Hammer Driver Drill

Excellent in Continuous Heavy-Duty Work
Increased max speed (0-2,600 RPM) in High mode for faster drilling speed in light duty applications
Variable 2-speed transmission (0-650 & 0-2,600 RPM) for a wide range of drilling, fastening and hammer drilling applications
Active Feedback sensing Technology (AFT) turns the motor off if bit rotation is suddenly forced to stop
Electronical clutch (41/21 settings in Low/High mode) allows for clutch setting in the torque range which cannot be covered with mechanical clutch
Outstanding drilling speed; Delivers 20% or more higher speed than previous model

Technical Specifications

Capacity	Steel : 20 mm (13/16”) Wood (Auger-Bit): 50 mm (2”) Wood (Self-Feed Bit): 76 mm (3”) Wood (Hole Saw): 152 mm (6”) Masonry: 20 mm (13/16”)
Chuck Capacity	1.5 – 13 mm (1/16 – 1/2”)
No load speed (rpm)	Hi: 0 – 2,600 Lo: 0 – 650
Impacts Per Minute (IPM)	Hi: 0 – 39,000 Lo: 0 – 9,750
Max tightening torque	Hard / Soft: 140 / 68 N·m
Max lock torque	125 N·m (1,100 in.lbs.)
Dimensions (L x W x H)	w/ BL4025: 182x86x275 mm w/ BL4040: 182x86x282 mm
Net weight	2.7 – 3.0 kg (6.0 – 6.6 lbs.)