ORANGE Submersible Pump SPC700
Orange Pumps submersible sump pump range are packed with features, and designed for domestic, farm, waste water, sewerage and storm water.
The SPC700 uses a hardened cutter plate so that large items in the incoming water are reduced in size and do not clog the pump. It is therefore capable of pumping a difficult mix of water and solids. This pump can be used on applications that would clog most pumps.
ORANGE SPC700 Description
Orange Pumps submersible sump pump range are packed with features, and designed for domestic, farm, waste water, sewerage and storm water.
The SPC700 uses a hardened cutter plate so that large items in the incoming water are reduced in size and do not clog the pump. It is therefore capable of pumping a difficult mix of water and solids. This pump can be used on applications that would clog most pumps.
Features:
- Oil bath seal chamber, with triple oil seals (dual nitride pump seals, and an additional lip seal to protect the motor)
- Heavy cast iron construction
- Hardened cutter plate
- Reliable and powerful 1100 W motor with thermal overload, electrical cable suitable for chlorine and oil installations
- 1 year warranty
- 230 V (single phase) : Automatic (float switch) operation only; 415 V (3 phase): Manual operation only
 Possible Applications:
- Dirty water mixed with large items
- Sewage with small hygiene items, larger solids
- Effluent from abattoirs etc
- Grey water, small soft solids up to 10%
- Fountains
- Maximum solids size: 25 mm
Technical Specifications
| Phase | Single Phase |
| Watts Out | 1100 W |
| Amps | 5.5 A |
| Volts | 230V |
| Frequency | 50 Hz |
| Rating | IP68 |
| Metres | 11 m |
